AUTOFLAME Mk8 MM User Manual

2 Options & Parameters
Mk8 MM Manual Page | 33
2 OPTIONS AND PARAMETERS
The Options, Parameters and Expansion Options must only be changed by factory trained and
certified technicians who have a thorough appreciation of the Autoflame combustion systems and
the combustion process in general. Any person changing these settings without the correct factory
training and understanding of the boiler plant may place themselves and others in a potentially
dangerous situation.
2.1 Options
CH1, CH2, CH3, CH4, CH5, CH6 and CH7 refer to the rows of buttons respectively starting
with CH1 at the top.
The options, parameters and expansion options and their settings are all viewable while the MM is in run
mode. In commissioning mode, all of the options, parameters and expansion options can be adjusted
according to the application. Non safety-critical options, parameters and expansion options can be adjusted
through Online Changes.
Figure 2.1.i Splash Screen
Power up the unit. If the MM has already been commissioned, press when the system starts
up. If the system is not already commissioned, the MM will go into commissioning mode automatically.

AUTOFLAME Mk8 MM Specifications

General

Brand	AUTOFLAME
Model	Mk8 MM
Category	Controller
Language	English