18 Operation
Mk8 MM Manual Page | 346
18.16.2 Draught Control – History
Figure 18.16.2.i Draught Control – History
Press in the Draught Control Status screen in Figure 18.16.1.i to view the Draught Control History
screen, showing the draught servomotor and draught pressure histories.
This data is logged for 24 hours on the MM. Use the buttons to change the timescale of the data
displayed and press and drag on the axis to zoom in/out of the graph.
This information is logged for 2 years on the DTI when connected with the MM.
Note: Power cycling the MM or changing fuel will reset the 24-hour history data log on the MM.
To Next Page
Loading...
