1 Mk8 MM Overview, Specifications and Wiring
Mk8 MM Manual Page | 12
VERY IMPORTANT SAFETY NOTES
Please fully read and understand the following notes before commencing
with any work related to the Mk8 MM. Failing to do so can result in
serious injury or even death, and can cause serious equipment and
property damage.
Any person working on a boiler must be adequately trained and have a thorough
understanding and appreciation of the boiler plant.
It is the responsibility of the technician working on the plant to ensure that the
system operation meets all local codes and regulations.
Options, Parameters and Expansion Options must only be changed by an
Autoflame-trained and certified technician who has thorough understanding of the
Autoflame combustion control systems and boiler/combustion control in general.
Any person changing these settings without undergoing the necessary training and
gaining understanding of the boiler plant may place themselves and others in a
potentially dangerous situation or cause permanent equipment damage.
Modification to the Autoflame system settings should only ever be carried out by
qualified combustion engineers. Changes to the Autoflame control system setup
has the potential to make the controller operate in an unstable and potentially
unsafe manner.
Commissioning or burner start-up must only be carried out by a an Autoflame-
trained and certified technician.
The commissioning procedure as described must be strictly adhered to. Anybody
commissioning an Autoflame system must be trained in operating combustion
equipment safely.
Autoflame products must only be installed, set up, commissioned and adjusted by
an Autoflame certified technician.
The fundamental idea of the system is to set a fuel valve position and then set a
corresponding air damper position. Care must be taken when adjusting the fuel and
air positions so as not to create any unstable or hazardous combustion conditions,
e.g. moving the fuel valve to the open position without increasing the air damper
position. Improper use may result in property damage, serious physical injury or
death.
Electrical connections are live, incorrect application may result in serious physical
injury or death.
If you are unclear about anything related to the Autoflame system, please contact
Autoflame for technical advice.
To Next Page
Loading...
