2 Options & Parameters
Mk8 MM Manual Page | 35
Figure 2.1.iii Commission Mode
The Commission Mode screen gives information on the following:
• Current selected fuel
• Which fuels have been commissioned
• Number of times the unit has been commissioned
• Seral number
• Bootloader version
• BC, MM and Display software
In Commission Mode, the engineer can:
• Commission the burner for selected fuel
• Commission gas and air pressure sensors
• Commission water level probes
• Commission the bottom blowdown module
• Adjust options, parameters and expansion options
• Setup and change Boiler Configuration
• Configure first out settings and labels
• Set the time and date
• Upload/download commissioning data
• Unlock expansion features
• Set the language
• View fault logs, system log and diagnostics
• View fuel commission data
Note: The Times Commissioned is for the total system and will increment with every fuel commission, single
point change and commission data upload.
To Next Page
Loading...
