Automatic Systems SmartLane - Page 5

8.18. Removing a housing extension with filler stainless steel panels ........................................... 73
8.19. Adjusting the clearance for the passage of the mobile obstacles ......................................... 74
8.20. Adjusting the fixed obstacle .......................................................................... 75
8.21. Adjusting the kinematics ............................................................................. 75
8.22. Removing and adjusting the detection photocells ....................................................... 76
8.22.1. Removing the photocell from the fixed obstacle ...........................................................................77
8.22.2. Adjusting the photocells ................................................................................................79
8.23. Removal of the soft stop ............................................................................. 80
8.24. Replacing and adjusting the balance spring ............................................................ 81
8.24.1. Replacing the spring ...................................................................................................81
8.24.2. Adjustment of the balance spring ........................................................................................82
8.25. Removing a motor ................................................................................... 83
8.26. Configuring the Variable frequency inverter ATV320 ...................................................... 84
8.26.1. Changing the frequency converter settings ...............................................................................84
8.26.2. Entering the configuration settings into the variable frequency inverter ......................................................84
8.26.3. SmartLane specific configuration settings (New Generation) ................................................................85
8.27. Adjusting the height of the DIRAS 'Trolley Detection’ cells ................................................ 86
8.28. Maintenance ........................................................................................ 87
8.28.1. Maintenance of surfaces ...............................................................................................87
8.28.2. Preventive maintenance ................................................................................................87
8.29. Maintenance programmes (Per lane) ................................................................... 88
8.30. Summary table of maintenance programmes ............................................................ 90
8.30.1. Recommended spare parts ..............................................................................................91
8.31. Troubleshooting ..................................................................................... 92
8.32. Dielectric strength and leakage current test ............................................................ 92
8.33. Storage ............................................................................................ 93
8.34. Disposal / Destruction ............................................................................... 93
9. Assignment of circuit board components ...................................................94
9.1. Transmitter DIRAS boards (AS1642 & AS1652) ............................................................ 94
9.2. Receiver DIRAS Circuit Board (AS1643 & AS1653) ......................................................... 94
9.3. Motherboard (CPU) AS1190 ............................................................................ 95
9.4. AS1603 circuit board - Main and E/S interface board ..................................................... 96
9.5. AS1605 circuit board - Main and E/S interface board ..................................................... 98
9.6. CAN end of bus circuit board .......................................................................... 99
9.7. Dynamic light board AS1656 .........................................................................100
9.8. CAN addresses of the different circuit boards ..........................................................101
10. Customisation .........................................................................102
10.1. Regulated heating (Optional) .........................................................................102
10.2. Auto-transformer - 120 V > 230 V (Optional) ............................................................ 103
11. Wiring Diagrams ........................................................................104
12. EC Declaration of Conformity .............................................................105
3
SmartLane