Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Install and Cable the Cabinet
1-60Install the DEFINITY ONE system cabinet
1
6. Set the cabinet onto the wall and align the slots with the shoulder screws.
See Figure 1-27. Slide the cabinet to the left to hold it in place. Tighten the
screws securely.
Figure 1-27. Typical wall-mount installation
7. Drill 2 lower mounting holes using the cabinet as a template.
8. Thread the 2 lower screws and tighten.
!
WARNING:
Ensure that the right bottom safety screw is in place and tight.
I
Figure Notes
1. #12 x 1-inch shoulder screws 2. #12 x 1-inch safety screw
To Next Page
Loading...
