DEFINITY ECS What’s New for Release 10
555-233-004
Issue 1
December 2001
Contents
xviii
■ Install the Avaya IP600 system cabinet 1-11
Verify the carrier address ID on RMC cabinets 1-11
Floor-mount the Avaya IP600 cabinet 1-13
Rack-mount the Avaya IP600 cabinet 1-14
Rack-mount two Avaya IP600 cabinets 1-18
■ Check AC power and ground for Avaya IP600I 1-19
Check AC power 1-19
Approved grounds 1-20
Uninterruptible power supply 1-22
Cabinet power switch 1-23
Connect cabinet grounds and other grounds 1-24
Install coupled bonding conductor 1-26
Connect the power cords 1-26
■ Cable the Avaya IP600 system 1-27
Install Processor Interface cable 1-28
Cable the two-cabinet Avaya IP600 system 1-29
Cable the three-or-more cabinet
Avaya IP600 system 1-34
■ Install RMC patch panels and external modem 1-34
Install patch panels and shelf 1-34
Install the external modem 1-36
■ Install equipment room hardware for Avaya IP600 1-37
Cross-connect the cabinet to the patch panels 1-37
Allowable circuit packs 1-37
Non-allowable circuit packs 1-40
Circuit pack installation 1-42
Off-premises circuit protection 1-46
Install sneak fuse panels 1-46
■ Set ringing option for Avaya IP600 1-49
Section II - DEFINITY ONE Installation 1-51
■ Check customer’s order 1-51
■ Correct shipping errors 1-51
■ Unpack and inspect 1-51
To Next Page
Loading...
