Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Index
IN-5
hardware
adding circuit packs, 6-2
adding CO, FX, WATS, and PCOL, 6-18
adding code calling, 6-21
adding DID trunks, 6-19
adding IP trunk, 6-2
adding pooled modem, 6-22
adding speech synthesizer circuit pack, 6-21
adding tie trunks, 6-19
adding TN750C circuit pack, 6-24
additions, 6-1
hardware configuration for Avaya Site
Administration
, 7-7
help, online for Avaya Site Administration, 7-12
horizontally mounted cabinets, 1-58
hunt groups, 3-38, 3-45
I
impedance, setting, A-4
INADS modem, 9-5
initialization, AUDIX, 3-48
initializing the system, 3-1
install and cable cabinet checklist, v
installation
Avaya Site Administration, B-12
BRI terminating resistor, 1-113
circuit packs, 1-42, 1-85
coupled bonding conductors, 1-26, 1-71
Definity One, 1-51
emergency transfer power panel, 1-125
equipment room hardware, 1-37, 1-80
error messages, 9-2
external modem, 1-36, 1-79
ground block, 1-68
INTUITY languages, C-5, C-8
IP600, 1-3
license file, 3-16
main distribution frame and external
modem, 1-77
Message Manager, 3-51, 8-1
multi-point adapters, 1-117
off-premise station wiring, 1-120
password file, 3-10
sneak fuse panels, 1-46, 1-91
system cabinet, 1-11, 1-56
telephones, 1-97
installation checklists, v
installation scripts, 3-10
installconfig, 9-4, G-4
Installing INTUITY languages, C-5
installing the cabinet, 1-1
international password file, procedures, 3-9
Intuity AUDIX
digital networking, 4-1
networking, 4-1
INTUITY languages
installation, C-8
INTUITY languages, installation, C-5
IP solutions, Media Processor, 6-6
IP Trunk, installing, 6-2
IP, setting RAS IP address, G-6
IP600 installation, 1-3
AC power and ground, 1-19
cabinet power switches, 1-23
cabinets, cross connecting to MDF, 1-37
circuit packs, allowable, 1-37
connect power cords, 1-26
coupled bonding conductors, 1-26
equipment room hardware, 1-37
non-allowable circuit packs, 1-40
off-premises circuit protection, 1-46
setting ringing option, 1-49
site requirements, 1-3
system cabinet, 1-11
unpacking, 1-5
IP600, comcodes for CMC equipment, 1-8
IP600, connectivity and access, 2-1
ISDN, BRI
fanout of multipoint installations, 1-119
terminating resistor, 1-113
ISDN-PRI, adding, 6-27
L
label main distribution frames, 1-94
LAC bash commands, list of, G-1
LAN
IP Trunk, 6-2
setting customer’s information, G-6
LAN interface, 3-25
laptop computer
connecting, 2-2
verifying connection, 2-10
lead designations, A-5
port board, 1-112
telephones, 1-112
LEDs, 3-4
alarms, E-2
attendant console, F-1
boot sequence, E-1
circuit packs, F-2
indicators on maintenance/processor circuit
packs, E-2
power supply, F-4
TN795 processor circuit packs, E-2
license file
installing, 3-16
local machines, changing information, 4-7
login groups, B-2
login names, B-2
To Next Page
Loading...
