Parameter name Default
value
Description
• 1: To set Backlight Timer value
according to user settings.
Note:
Only Avaya J169/J179 IP
Phone supports this feature.
BAKLIGHTOFF 120 Specifies the number of minutes of
idle time after which the display
backlight will be turned off.
Phones with gray-scale displays do
not completely turn backlight off,
they set it to the lowest non-off
level.
Valid values are 0 through 999.
A value of 0 means that the display
backlight will not be turned off
automatically when the phone is
idle.
For ENERGY STAR compliance on
applicable phones, a value of 20 is
recommended.
BRANDING_VOLUME 5 Specifies the volume level at which
the Avaya audio brand is played.
Value Operation
• 8: 9db above nominal
• 7: 6db above nominal
• 6: 3db above nominal
• 5: nominal
• 4: 3db below nominal
• 3: 6db below nominal
• 2: 9db below nominal
• 1:12db below nominal
BRURI Null Provides the capability to send a
phone report to a server with the
URI of the server defined by this
parameter. To send the report, go to
Main Menu > Admin > Debug >
Phone report.
C
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 200
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
