Avaya JEM24 Installing

Parameter name Default
value
Description
CALL_TRANSFER_MODE 0 Determines the call transfer mode
in 3rd party environments. Valid
value is 0 or 1.
CALLFWDADDR
The parameter is only available in an Avaya Aura
®
environment.
Null Sets the address to which calls are
forwarded for the call forwarding
feature.
Users can change or replace this
administered value if
CALLFWDSTAT is not 0.
CALLFWDDELAY
The parameter is only available in an Avaya Aura
®
environment.
Sets the number of ring cycles
before the call is forwarded to the
forward or coverage address. The
default delay is one ring cycle.
CALLFWDSTAT
The parameter is only available in an Avaya Aura
®
environment.
0 Sets the call forwarding mode of
the phone by summing the
following values:
• 1: Permits unconditional call
forwarding.
• 2: Permits call forward on busy.
• 4: Permits call forward/no answer.
• 0: Disables call forwarding.
Example: a value of 6 allows call
forwarding on busy and on no
answer.
CERT_WARNING_DAYS 60 Specifies the number of days
before the expiration of a certificate
that a warning will first appear on
the phone screen. Certificates
include trusted certificates, OCSP
certificates and identity certificate.
Log and syslog message will also
be generated. The warning will
reappear every seven days.Valid
values are from 0 to 99.
Value operation:
• 0: No certificate expiration
warning will be generated.
CERT_WARNING_DAYS_EASG 365 Specifies how many days before
the expiration of EASG product
certificate that a warning should
first appear on the phone screen.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 201
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English