Avaya JEM24 Installing

Parameter name Default
value
Description
Syslog message will be also
generated. Valid values are from 90
to 730.
CNGLABEL 1 Determines if personalize button
labels can be displayed to the user.
Value Operation:
• 0: Capability not displayed to the
user.
• 1: Capability displayed to the
user.
CONF_TRANS_ON_PRIMARY_APPR 0 Determines conference and
transfer setup whether to use idle
primary call appearance or idle
bridged call appearance.
Value Operation:
• 0: To specify conference and
transfer setup to use an idle
primary call appearance at first
attempt. However, if an idle
primary call appearance is
unavailable, then the setup will
use idle bridged call appearance
regardless of the setting of
AUTO_SELECT_ANY_IDLE_AP
PR. If a bridged call appearance
initiates the setup, then setup will
use idle bridged call appearance
of same extension. If an idle
bridged call appearance of the
same extension is not available
and
AUTO_SELECT_ANY_IDLE_AP
PR is set to 1, then setup will use
any idle call appearance.
However, if
AUTO_SELECT_ANY_IDLE_AP
PR is set to 0 and if same bidged
call extension is not available, the
setup initiated on a bridged call
appearance will be denied.
• 1: To specify conference and
transfer setup to use an idle
primary call appearance at first
attempt. However, if an idle
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 202
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English