Avaya JEM24 Installing

Parameter name Default
value
Description
If the parameter is set to a value
that is outside the range then
default value is selected.
Note:
The parameter is set to 0 in IP
Office environment.
CONFIG_SERVER Null Specifies the address of the Avaya
configuration server.
Valid values contain zero or one IP
address in dotted decimal or DNS
name format, optionally followed by
a colon and a TCP port number.
The value can contain 0 to 255
characters. The default value is
null.
This parameter is not supported in
IP Office environment as PPM is
not supported.
CONFIG_SERVER_SECURE_MODE 1 Specifies whether HTTP or HTTPS
is used to access the configuration
server.
Value Operation:
• 0: HTTP
• 1: HTTPS
• 2: Use HTTPS if SIP transport
mode is TLS, otherwise use
HTTP.
This parameter is not supported in
IP Office environment as PPM is
not supported.
CONTACT_NAME_FORMAT 0 Specifies how contact names are
displayed.
Value operation
• 0: The name format is Last name,
First name.
• 1: The name format is First name,
Last name.
CONTROLLER_SEARCH_INTERVAL 16 Specifies the number of seconds
the phone will wait to complete the
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 204
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English