Avaya JEM24 Installing

Parameter name Default
value
Description
DSCPMGMT 16 Specifies the DSCP value for
OA&M management packet.
Valid values are from 0 to 63.
DSCPSIG 34 Specifies the layer 3 Differentiated
Services (DiffServ) Code Point for
signaling frames generated by the
phone.
Valid values are 0 through 63.
This parameter can also be set
through LLDP, which overwrites any
value set in this file.
DSCPVID 34 Specifies the layer 3 Differentiated
Services (DiffServ) Code Point for
video frames generated by the
phone.
Valid values are 0 through 63. The
default value is 34.
DSTOFFSET 1 Specifies the time offset in hours of
daylight savings time from local
standard time.
Valid values are 0, 1, or 2. The
default value is 1.
DSTSTART 2SunMar2L Specifies when to apply the offset
for daylight savings time.
The default value is 2SunMar2L
(the second Sunday in March at
2AM local time).
DSTSTOP 1SunNov2L Specifies when to stop applying the
offset for daylight savings time.
The default value is 1SunNov2L
(the first Sunday in November at
2AM local time).
DTMF_PAYLOAD_TYPE 120 Specifies the RTP payload type to
be used for RFC 2833 signaling.
Valid values are 96 through 127.
E
EASG_SITE_AUTH_FACTOR Null Specifies Site Authentication Factor
code associated with the EASG site
certificate being installed. Valid
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 210
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English