Avaya JEM24 Installing

Parameter name Default
value
Description
ENABLE_CONTACTS 1 Specifies if the contacts application
and associated menus are
available on the phone.
Value Operation:
• 0: No. The phone disables the
Contacts option on the interface.
• 1: Yes
Note:
The parameter is set to 1 in IP
Office 10.1 or later. In previous
releases it is set to 0.
ENABLE_DND 1 Specifies that the do-not-disturb
feature is enabled.
Value Operation
• 0: Disabled
• 1: Enabled
Note:
This parameter is only
applicable if a 3PCC
environment is configured.
ENABLE_DND_PRIORITY_OVER_CFU_CFB 0 Specifies that the Do-not-disturb
(DND) feature is given priority over
Call forwarding unconditionally
(CFU) and Call forwarding busy
(CFB).
Value Operation
• 0: Disabled
• 1: Enabled
Note:
This parameter is only
applicable if a 3PCC
environment is configured.
ENABLE_EARLY_MEDIA Specifies if the phone sets up a
voice channel to the called party
before the call is answered.
Value Operation:
• 0: No
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 213
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English