Avaya JEM24 Installing

Parameter name Default
value
Description
• 1: Yes
Setting this parameter to 1 can
speed up call setup.
ENABLE_EXCHANGE_REMINDER 0 Specifies whether or not exchange
reminders will be displayed.
Value Operation:
• 0: Not displayed
• 1: Displayed
ENABLE_G711A 1 Specifies if the G.711 a-law codec
is enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
ENABLE_G711U 1 Specifies if the G.711 mu-law codec
is enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
ENABLE_G722 1 Specifies if the G.722 codec is
enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
ENABLE_G726 1 Specifies if the G.726 codec is
enabled.
Value Operation:
• 0: Disabled
• 1: Enabled
ENABLE_G729 1 Specifies if the G.729A codec is
enabled.
Value Operation:
• 0: Disabled
• 1: Enabled without Annex B
support (default).
• 2: Enabled with Annex B support.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 214
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English