Avaya JEM24 Installing

Parameter name Default
value
Description
ENABLE_IPOFFICE 0 Specifies whether the J100 phone
can operate in 2 different modes
with IP Office. The first mode allows
native support of the J100 phone
with IP Office with a limited feature
set. The second mode allows
support of the J100 phone with
additional feature support driven by
the IP Office proxy.
Value Operation:
• 0: The phone does not support IP
Office (except in Avaya Aura
failover mode).
• 1: The phone supports IP Office
in a native environment.
• 2: The phone supports IP Office
with additional features driven by
the IP Office proxy
Avaya J129 IP Phone supports
value 0 and 1.
Avaya J139 IP Phoneand Avaya
J169/J179 IP Phonesupports value
0 and 2.
ENABLE_MLPP
0 Specifies that whether the Multiple
Level Precedence and Preemption
(MLPP) is enabled or not.
Value Operation:
• 0: Disabled.
• 1: Enabled.
ENABLE_MODIFY_CONTACTS Specifies if the list of contacts and
the function of the contacts
application can be modified on the
phone.
Value Operation:
• 0: No
• 1: Yes
ENABLE_MULTIPLE_CONTACT_WARNING Specifies if a warning message
must be displayed if there are
multiple phones registered on a
user's behalf.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 215
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English