Avaya JEM24 Installing

Parameter name Default
value
Description
Value Operation:
• 0: No
• 1: Yes
Note:
Multiple registered phones can
lead to service disruption.
ENABLE_OOD_MSG_TLS_ONLY 1 Specifies if an Out-Of-Dialog (OOD)
REFER must be received over TLS
transport to be accepted.
Value Operation:
• 0: No, TLS is not required.
• 1: Yes, TLS is required.
Note:
A value of 0 is only intended
for testing purposes.
ENABLE_OPUS 1 Specifies if the OPUS codec
capability of the phone is enabled
or disabled.
Value Operation:
• 0: Disabled.
• 1: Enabled OPUS wideband with
bitrate of 20KBps.
• 2: Enabled OPUS narrowband
with bitrate of 16KBps.
• 3: Eanbled OPUS narrowband
with bitrate of 12KBps.
Note:
Avaya J129 IP Phone does not
support third-party local call
conference with OPUS.
ENABLE_PHONE_LOCK 0 Specifies whether the Lock softkey
on the Idle phone screen and the
Lock feature button are enabled on
the phone. If enabled, a user can
manually lock the phone by
pressing the button or selecting the
feature.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 216
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English