Parameter name Default
value
Description
W
WAIT_FOR_INVITE_RESPONSE_TIMEOUT 60 Specifies the maximum number of
seconds that the phone waits for
another response after receiving a
SIP 100 Trying response.
Valid values are 30 through 180.
WAIT_FOR_REGISTRATION_TIMER 32 Specifies the number of seconds
that the phone waits for a response
to a REGISTER request.
If no response message is received
within this time, registration will be
retried based on the value of
RECOVERYREGISTERWAIT.
Valid values are 4 through 3600.
WAIT_FOR_UNREGISTRATION_TIMER 32 Specifies the number of seconds
the phone waits before assuming
that an un-registration request is
complete.
Un-registration includes termination
of registration and all active dialogs.
Valid values are 4 through 3600.
WARNING_FILE Null Specifies the file name or URL for a
custom single-channel WAV file
coded in ITU-T G.711 u-law or A-
law PCM with 8-bit samples at
8kHz to be used as a call recording
warning instead of the built-in
English warning.
The value can contain 0 to 255
characters.
WBCSTAT 1 Specifies whether a wideband
codec indication is displayed when
a wideband codec is used.
Value Operation:
• 0: Disabled
• 1: Enabled
WEB_ADMIN_PASSWORD 27238 Specifies the password to access
the phone through a web browser
as an administrator.
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 271
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
