Avaya JEM24 Installing

Name Description
IP Address Specifies the IP address of the phone.
The valid value is the IP address in the dotted decimal name
format. The maximum number of characters is 15.
The default value is “0.0.0.0”.
Subnet Mask Specifies the Wi-Fi network mask address.
The valid value is the IP address in the dotted decimal name
format. The maximum number of characters is 15.
The default value is “0.0.0.0”.
Gateway IP Address Specifies the IP address of the gateway in the Wi-Fi network.
The valid value is the IP address in the dotted decimal name
format. The maximum number of characters is 15.
The default value is “0.0.0.0”.
WEP
WEP Key Length Specifies the passcode key length for WEP security.
The options are:
• 64 bit
• 128 bit (default)
WEP Default Key Specifies the default key in your Wi-Fi network.
The options are:
• WEP Key 1 (default)
• WEP Key 2
• WEP Key 3
• WEP Key 4
WEP Key 1 Specifies the WEP key values in the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
WEP Key 2 Specifies the WEP key values for the Wi-Fi network.
Table continues…
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 54
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English