Avaya JEM24 Installing

Name Description
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
WEP Key 3 Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
WEP Key 4 Specifies the WEP key values for the Wi-Fi network.
The valid value is up to 26 alphanumeric characters that can be
the following:
• Blank
• 0 – 9
• A – F
The value must include 10 hexadecimal digits for 64 bit keys
and 26 hexadecimal digits for 128 bit keys. The default value is
empty.
WPA2 Enterprise (802.1x)
EAP Authentication Method Specifies the type of EAP authentication method.
The options are:
• PEAP (default)
• TLS
EAP Phase 2 Authentication Method Specifies the type of EAP Phase 2 authentication method.
The options are:
• None (default)
• MSCHAPV2
Authentication Identity Specifies the authentication identity.
Table continues…
Configuring Wi-Fi settings
December 2018 Installing and Administering Avaya J100 Series IP Phones 55
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English