Avaya JEM24 Installing

Name Description
XSI Event Channel
Duration
Specifies the time duration in minutes for XSI event channel. The phone
will ask XSP server to maintain the established Comet HTTP connection
for the specified period of time. After 50% of this time phone will reestablish
Comet HTTP connection.
The valid value is an integer from 60 to 1440. The default value is 60
minutes.
XSI Event Channel
HeartBeat
Specifies the time interval in seconds to send heartbeat messages over
Comet HTTP connection to XSP server of BroadWorks.
The valid value is an integer from 1 to 999. The default value is 15
seconds.
XSI User Id Specifies the BroadSoft user ID which the phone must use for XSI
authentication.
BroadSoft user Id is the SIP user Id excluding at (@) and domain.
The valid value is a string of 0 to 255 ASCII characters.
XSI Web Password Specifies the BroadSoft's web portal password which the phone must use
for XSI web authentication.
If the value is null, SIP authentication method is used.
Busy Lamp Field( BLF)
Allow User to Change BLF
List
Specifies the control to provide the user permissions to add and remove
BLF monitored users from the phone.
The values are:
• User is allowed to add or delete BLF monitored users
• User is allowed to add BLF monitored users
• User is allowed to delete BLF monitored users
• User is allowed to add and delete BLF monitored users (default)
SIP Global Settings
SIP Domain Specifies the SIP domain used for SIP registration.
The valid value is a string of 0 to 255 ASCII characters.
Enable PPM as source of
Proxy Server
Specifies whether PPM is used as a source of SIP proxy server
information.
Note:
This is an Avaya Aura
®
setting which is ignored in the 3PCC
environment.
The options are:
• Yes (default)
• No
Table continues…
Configuring SIP settings
December 2018 Installing and Administering Avaya J100 Series IP Phones 59
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English