Bardac PLX User Manual

162 SERIAL LINKS
10.3.1 REFERENCE EX CHAN GE / Reference exchange slave ratio PIN 189
Note. In SLA VE mode, when data is received, it initiates an immediate transmit of its own GETFRO M data.
10.3.2 REFERENCE EXCH ANGE/ Reference exchange slave sign PIN 190
Note. In SLA VE mode, when data is received, it initiates an immediate transmit of its own GETFRO M data.
10.3.3 REFERENCE EXCH A NGE / Reference exchange slave monitor PIN 191
In M ASTER mode the receive channel still accepts data. E.g. A MASTER unit can borro w a SLA VE unit block.
10.3.4 REFERENCE EXCH ANGE / Reference exchange master monitor PIN 192
Note. In M ASTER mode the unit initiates transmission. In SLA VE mode transmission is initiated by reception.
10.3.5 REFERENCE EX CH A NGE / Reference exchange master GET FROM
This is the data that will be transmitted by a master, and by a slave in response to receiving data. Hence to
cascade units there is one MASTER feeding the first SLA VE, then the first SLA VE feeds the second SLA VE
etc. The data being received in each unit is connected internally by the REF EX CH SLA VE GO TO in the
BLO CK OP CONFIG menu. The data being sent to the next unit is determined by this GETFRO M
REFERENCE EXCH A NGE 4
189)REF X C SLV RA TIO
189)REF X C SLV RA TIO
1.0000
PARA METER RANGE DEF AULT PIN
REF X C SLV RA TIO + /-3.0000 1.0000 189
Scales the incoming parameter
for use within the unit.
REFERENCE EXCH A NGE 4
190)REF X C SLV SIGN
190)REF X C SLV SIGN
NO N-IN VERT
PARA METER RANGE DEF A ULT PIN
REF X C SLV SIGN NON-IN VERT or INVERT NON-IN VERT 190
Used to invert the incoming
parameter.
REFERENCE EXCH A NGE 4
192)REF X C M ASTER MN
192)REF X C M ASTER MN
0.00%
PARA METER RANGE PIN
REF X C M ASTER MN + /- 300.00% 192
Monitors the outgoing data
prior to RS232 port 1 transmit.
REFERENCE EXCH A NGE 4
GET FROM
GET FROM
X X X)Description of function
PARA METER RANGE DEF A ULT
GET FROM PIN 000 to 720 400
Defines the source PIN for data to
output via the TRA NSMIT channel
REFERENCE EXCH A NGE 4
191)REF X C SLA VE MON
191)REF X C SLA VE MON
0.00 %
PARA METER RANGE PIN
REF X C SLA VE MON + /- 300.00% 19 1
Monitors the RS232 port 1
incoming data in both modes.

Bardac PLX Specifications

General

Brand	Bardac
Model	PLX
Category	Controller
Language	English