7/13
Chapter 7: Maintenance
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
6. Make sure the drive drum is still at right angles to the direction of the belt motion. If necessary, adjust
the angle and check the tension on both sides of the belt.
7. When the correct tension is reached on both sides of the belt, check the tracking of the belt, and if
necessary adjust (see next procedure).
8. Remove the marks and position the inner and outer scrapers in such a way that they lightly touch the
belt.
To Next Page
Loading...