Chapter 5: Routine Operational Procedures
5/11
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
5.5. Sorting
Attention: - Before sorting, always make sure no emergency stops have been pushed
and no alarms have been activated.
- Always make sure that no factors remain that could impede the sorting
process: no objects on the belt, infeed shaker and/or return system, the belt
must be clean and well aligned, windows must be clean, etc. ...
(see maintenance and cleaning chapters).
- Make sure all doors and compartments have been closed.
- It is often necessary to make small changes to the threshold and fi lter
settings with every new product batch, due to variations between batches in
product and defects.
The GENIUS Compact will always start-up with the same product fi le that has last been used before the
machine was switched off. The symbol of the currently used product fi le is displayed in the upper part of
the main menu under Current product fi le (see picture).
To Next Page
Loading...