Picture: Fan + air cooling tubing for FSV-system
11.5. Maintenance
11.5.1. Cooling
To cool the cameras and the tubes with the fl uorescent lights, a big fan is placed inside the machine (see
fi rst picture). Via various tubes, this fan blows air from inside the machine into the upper light tube, and
via a tube on the left front of the machine into the left FSV unit, through the lower light tubes into the right
FSV unit. Via another tube the air gets back into the central space of the sorter.
To keep the light tubes from bending, they must keep on rotating as long as the lights are on.
Chapter 11: FSV-system
11/6
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
To Next Page
Loading...