9/9
Chapter 9: The Touchscreen program
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
9.4. Detection Menu
Press the Detection button in the navigation bar to get to the Detection menu
The Detection menu and its submenu’s contain all info, settings and functions regarding the actual
detection of product and defects.
For more info about the setting and/or adjusting of thresholds & fi lters and the taking of reference lines,
see chapter 5: operational procedures.
This menu has 3 tabs in the main screen:
1.- Combined sorting results
In this screen the total sorting results are split up per device:
- The pie chart in the left corner shows how much product is rejected and by which device (camera/laser).
- The graph on the main screen shows how much is rejected by each device over a certain period of time.
The time period that is displayed can be adjusted with the dial near the bottom of the screen.
This menu may be useful to check which camera rejects the most product.
To Next Page
Loading...