Chapter 7: Maintenance
7/16
Operators & Maintenance Manual GENIUS Compact Version UK 0.1 © BESTnv
BESTnv Industrial Research BV, Marinus van Meelweg 20, 5657 EN, EINDHOVEN, THE NETHERLANDS
General tel. +31 (40) 292 2622 - Service tel. +31 (40) 292 2620 - Fax. +31 (40) 292 2633 - Email: service.BESTnv@bestnv.com
greasing nipple standard return axle
Attention! - Do not use oils containing additives which may damage the motor insulation
or the seals.
- Furthermore, graphite, molybdenum disulphide or other oils based on
electrically conductive additives must not be used, as they will cause damage
to the motor.
Standard (Ø 75 mm) return axle system
A greasing nipple can be found on both sides of the return axle system (see picture underneath). Regularly
add grease (preferably after cleaning the machine) and keep adding grease until the old grease is pressed
out through the relief valve.
To Next Page
Loading...