To launch a portfolio
In Portfolio Manager, select a Portfolio.1.
Click the Launch Portfolio button.2.
Tip: You may double-click the selected Portfolio.
Note: If you have Outputs that are assigned to NICs that do not exist on the current machine,
a dialog box will appear asking you to select a new NIC.
On the NIC dialog box, click on the drop-down menu of the displayed outputs to1.
change the NIC for each output.
On the NIC dialog box, click OK.2.
Result:
The new NIC is assigned to the desired output.
All the BlackTrax and BTWYSIWYG files in the selected Portfolio open.
The Messages window of BlackTrax appears showing the most recent change in the
state of the system.
New Portfolios open with 12 Trackables by default for BlackTrax and BTWYG.
Notes:
How the Portfolio Manager is displayed at startup depends on the Open most recent Portfolio
when BlackTrax starts setting in the System section of System Configuration (on by default).
The Open most recent Portfolio when BlackTrax starts feature is disabled if a license check
fails when opening the Main GUI.
BlackTrax always opens to the Edit View.
How BTWYSIWYG files open from the Portfolio Manager depends on the Launch BTWYG file
with Portfolio setting in the System section of System Configuration (enabled by default).
To Next Page
Loading...