Device Manager Charging Stations
The Charging Stations widget displays identification, firmware information, and status of all connected
remote charging stations for the BTBeacons. In the Charging Stations widget, you can select and display
a charging station, and the settings of the selected Charging Station will be displayed in the Charging
Station Settings widget.
The Charging Stations widget displays the following settings:
Connect: Click this button to connect the newly added Charging Station.
Get Beacon List: Click this button to poll the Charging Station for all connected Beacons and add
them to the main list.
ID: Identification number of the Charging Station in the range between 101 to 254. The default ID
number is 201. The ID will always match the last octet of the IP Address (ID 201 = 10.133.5.201).
Serial Number: The serial number of the hardware.
IP Address: The network IP address where the Charging Station is connected.
Status: Connected or Disconnected.
Version: Firmware version.
Notes: Other information.
To Next Page
Loading...