CALREC Putting Sound in the Picture 123
In some situations, it may be necessary to
re-configure modular Hydra I/O boxes to
meet the requirements of each program.
This can be done offline, and the
configurations can be saved and loaded
when online again.
The Hydra input and output ports can be
grouped into lists to make them easier to
MODULAR I/O bOx CONfIgURATION
access either on the I/O patching screens
or on the I/O port assignment controls
on the control surface (if available). This
is done using the Options - Port Lists
screens
To Next Page
Loading...
