CALREC Putting Sound in the Picture 143
MONITOR SELECTOR SETUP
The screen shows a representation of the
Monitor Selector panel. The right side of
the screen lists all the available monitor
sources. Monitor sources are allocated
to the assignable selection buttons as
follows:
Select the button to which you want
•
to assign a source (screen button will
flash)
Select the required monitor soure •
from the list
Select “Allocate”
•
For Desk 1-4, Line 1-4 Main 1-4 or •
external sources, a pop up window
allows the user to enter a suitable
label for the screen button, and to
choose whether the source is mono,
stereo or surround.
To clear any button of its assignment,
simply allocate “Blank” from the list as a
source.
If your console uses the optional
assignable monitor panels, their control
screens will be slightly different. Please
refer to the Assignable Monitor Panels
section for details of their set up.
To Next Page
Loading...
