CALREC Putting Sound in the Picture 5
This equipment must be EARTHED•
Only suitably trained personnel •
should service this equipment
Please read and take note of all
•
warning and informative labels
Before starting any servicing
•
operation, equipment must be
isolated from the AC supply (mains)
Fuses should only be replaced with
•
ones of the same type and rating as
that indicated
Operate only in a clean, dry and
•
pollutant-free environment
Do not operate in an explosive
•
atmosphere
Do not allow any liquid or solid
•
objects to enter the equipment.
Should this accidentally occur then
immediately switch off the unit and
contact your service agent
Do not allow ventilation slots to be
•
blocked
Do not leave the equipment powered
•
up with the dust cover fitted
The rack mounting parts of this
•
equipment must be fitted into an
enclosure which complies with local
regulations
Cleaning
For cleaning the front panels of the
equipment we recommend anti-static
screen cleaner sprayed onto a soft cloth
to dampen it only.
HEALTH AND SAfETy
Explanation of Warning Symbols
The triangular warning symbols below
contain a black symbol on a yellow
background, surrounded by a black border.
The lightning flash with arrow head
symbol within an equilateral triangle is
intended to alert the user to the presence
of dangerous voltages and energy levels
within the product’s enclosure that may be
of sufficient magnitude to constitute a risk
of electric shock or injury.
The exclamation mark within an
equilateral triangle is intended to prompt
the user to refer to important operating or
maintenance (servicing) instructions in the
documentation supplied with the product.
Power Supply Blanking Plates
(ZN4849-3 and ZN6020)
If you are in receipt of a ZN4849-3 or
ZN6020 power supply unit please do
not remove the blanking plates which are
fitted to the unused output connectors.
The maximum potential between the
terminals exceeds 60 volts, the blanking
plates are fitted to avoid the risk of
electric shock.
To Next Page
Loading...
