162 Chapter 6: Infant Non-invasive Ventilation Operator's manual
L2786 Rev. M
6. Select Continue; the following message appears
7. If characterization is successful the following message appears
8. Select Continue.
9. Set the prescribed level for nCPAP Pressure and/or F
IO
2
by touching the primary control, turning the Data Dial until
the desired value is displayed and by either touching the primary control again or by touching the ACCEPT
membrane key adjacent to the Data Dial to activate the new setting. If NIMV is prescribed, set the prescribed level
for Inspiratory Pressure, Inspiratory Time and Rate as well.
10. Connect the Nasal CPAP device to the patient.
To Next Page
Loading...
