CareFusion AVEA - Initiating Nasal CPAP; NIMV

160 Chapter 6: Infant Non-invasive Ventilation Operator's manual
L2786 Rev. M
Initiating Nasal CPAP / NIMV
1. To initiate Nasal CPAP, select the Modes membrane button on the UIM, or touch the screen area for the Current
Mode Display. The Mode Select box appears.
2. Select Nasal CPAP/nIMV. The following message appears.
3. Disconnect the Nasal CPAP device from the patient and disconnect the expiratory limb of the circuit at the patient
wye.
Do not disconnect the Nasal CPAP device at the wye and leave the prongs open to ambient.