Chery T21 2014 - Differential Planetary Gear; Removal; Installation; Differential Parts Inspection

Chery Automobile Co., Ltd.
21 - DIFFERENTIAL
21–9
21
Differential Planetary Gear
Removal
1. Remove the differential (See page 17-22).
2. Remove the differential planetary gear.
a. Tap out the dowel pin (2) with a punch (1).
b. Remove the planetary gear shaft (1), planetary gear
(2) and drive shaft gear (3).
Installation
Installation is in the reverse order of removal.
Differential Parts Inspection
1. Clean all the components.
2. Check the following components for wear:
 Driven gear of final drive
 Planetary gear washer
 Drive shaft gear
 Planetary gear
 Planetary gear shaft
 Drive shaft gear washer
2
1
RA19200060
3
2
1
RT21210070
CAUTION
 Adjust clearance until the gear clearances of both sides are the same during installation.
 The drive shaft gears and planetary gears should operate normally after tapping in the dowel pin.