Chery Automobile Co., Ltd.
46 - SEAT
46–36
46
Seat Heater Switch
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the seat heater switch.
a. Using a screwdriver wrapped with protective tape, pry
up the claws on the seat heater switch.
b. Disconnect the seat heater switch connectors (arrow),
and remove the driver seat heater switch (1) and front
passenger seat heater switch (2).
Installation
Installation is in the reverse order of removal.
ï‚· Be sure to wear safety equipment to prevent accidents when removing seat heater switch.
ï‚· Avoid scratch or damage to the shift panel assembly when removing seat heater switch.
ï‚· Check seat heater switch for proper operation after installation.