Chery Automobile Co., Ltd.
22 - AXLE
22–18
22
e. Remove 2 coupling bolts (arrow) between upper part
of front sub frame welding assembly and body.
ï€
(Tightening torque: 180 ± 10 N·m)
f. Remove 2 coupling bolts (arrow) between rear part of
front sub frame welding assembly and body.
ï€
(Tightening torque: 180 ± 10 N·m)
g. Support the front sub frame welding assembly with a
transmission carrier and carefully remove it.
Installation
Installation is in the reverse order of removal.
ï‚· Always tighten coupling bolts and nut to the specified torque.
ï‚· Check and adjust front wheel alignment after installation.