Chery T21 2014 - Ignition Starting Switch (w;o PEPS System); Removal

Chery Automobile Co., Ltd.
15 - SQR484F STARTING SYSTEM
15–67
15
Ignition Starting Switch (w/o PEPS System)
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the combination switch cover (See page 28-13).
4. Remove the ignition starting switch.
a. Move the wire harness connectors (arrow) away from
ignition starting switch.
b. Disconnect the ignition starting switch connector (1).
c. Remove the fixing screws (arrow) from ignition
starting switch.

(Tightening torque: 13 ± 2 N·m)
d. Remove the ignition starting switch.
CAUTION
 Be sure to wear necessary safety equipment when repairing to prevent accidents.
 Try to prevent vehicle protector from being scratched during removal and installation.
RT21150140
1
RT21150150