Chery T21 2014 - Installation

Chery Automobile Co., Ltd.
49 - INTERIOR
49–22
49
7. Remove the left B-pillar upper protector assembly.
a. Remove 2 fixing screws (arrow) from the B-pillar
upper protector assembly.

(Tightening torque: 1.5 ± 1 N·m)
b. Using an interior crow plate, pry off the clip from the 
B-pillar upper protector assembly, pull out the front
seat belt from the B-pillar upper protector assembly,
and remove the left B-pillar upper protector assembly.
Installation
Installation is in the reverse order of removal.
RT21490130
CAUTION
 Make sure damaged clip are replaced and B-pillar upper protector assembly is installed in place when
installing B-pillar upper protector assembly.
 B-pillar upper protector assembly and front and rear door opening weatherstrips should be fitted closely
after installing B-pillar upper protector assembly.
 B-pillar upper protector assembly and B-pillar lower protector assembly and roof headlining should be
fitted closely after installing B-pillar upper protector assembly.