Chery T21 2014 User Manual

Chery Automobile Co., Ltd.
18 - QR019CHB CVT
18–114
18
Primary Shaft Speed Sensor
Removal
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the battery, battery tray and tray bracket (See page 16-7).
4. Remove the air filter (See page 10-17).
5. Disconnect the primary shaft speed sensor wire harness connector.
6. Remove the fixing bolt (1) of the primary shaft speed
sensor and take out the primary shaft speed sensor (2).

(Tightening torque: 10 - 12 N·m)
Installation
Installation is in the reverse order of removal.
2
1
RT21180370
CAUTION
 Keep clean of sensor and contact surface between sensor and transmission, and avoid dust or impurity
entering the transmission.
 During installation, apply automatic transmission fluid on the O ring of the sensor.

Chery T21 2014 Specifications

General

Brand	Chery
Model	T21 2014
Category	Automobile
Language	English