Chery Automobile Co., Ltd.
30 - ELECTRONIC POWER STEERING
30–27
30
Steering Gear Clearance Adjustment
1. Position the wheels straight ahead.
2. Turn the steering wheel to the right and left.
3. If there is noise in the steering gear, adjust the bolt
(arrow) until the collision noise cannot be heard when
turning the steering wheel.
4. Retighten the bolt in 1/8 turn (approximately 45°).
5. Perform a road test.
6. Loosen the bolt by 15° if the steering gear cannot return to the center position by itself.
7. Perform a road test.
To Next Page
Loading...
Need help?
General
