Chery T21 2014 User Manual

Chery Automobile Co., Ltd.
10 - SQR484F INTAKE SYSTEM
10–22
10
Inspection
1. Check electronic throttle assembly gasket.
Check electronic throttle assembly gasket for worn or
bent. If there is worn or bent, replace electronic throttle
assembly gasket.
2. Check electronic throttle.
Measure electronic throttle resistance according to the
table below.
Cleaning
Cleaning tool
1. Thin stick: used to support throttle valve plate for cleaning the carbon deposited on contact wall between
valve plate and throttle. Please use plastic, wooden or bamboo thin stick. Do not use metal thin stick,
avoiding scratching or deforming the valve plate.
2. Clean cloth or paper towel
RT21100210
RT21100211
123
456
-+
Tester
Connection
Adjustment
Specified
Condition
Ter mi n a l 3 -
Ter mi na l 2
Normal
temperature
1.067 kΩ
Ter mi n a l 6 -
Ter mi na l 2
Ter mi n a l 6 -
Ter mi na l 3
Rotate throttle
Resistance
between terminal
6 and terminal 2
increases as
throttle opens;
resistance
between terminal
6 and terminal 3
decreases as
throttle opens.
Ter mi n a l 5 -
Ter mi na l 2
Ter mi n a l 5 -
Ter mi na l 3
Rotate throttle
Resistance
between terminal
5 and terminal 2
decreases as
throttle opens;
resistance
between terminal
5 and terminal 3
increases as
throttle opens.

Chery T21 2014 Specifications

General

Brand	Chery
Model	T21 2014
Category	Automobile
Language	English