Chery Automobile Co., Ltd.
26 - BRAKE
26–22
26
Inspection
1. Check the check valve.
a. Remove the check valve from vacuum hose assembly.
b. Check that there is airflow (A) from vacuum booster to
engine, and no airflow (B) from engine to vacuum
booster.
If result is not as specified, replace vacuum hose
assembly.
Installation
Installation is in the reverse order of removal.
ï‚· Make sure to tighten fixing plugs and nuts to the specified torque during installation.
ï‚· Perform bleeding procedures for brake system and add brake fluid to proper level after completing
installation.