Chery Automobile Co., Ltd.
32 - SUPPLEMENTAL RESTRAINT SYSTEM
32–68
32
b. If there are scratches, cracks, dents or cuts on the
connectors or the spiral cable, replace the spiral cable
with a new one.
Installation
Installation is in the reverse order of removal.
HINT:
Always install the spiral cable correctly according to the
matchmarks on spiral cable and steering column (fully turn
the spiral cable clockwise slowly, then turn it
counterclockwise until yellow ball appears in the transparent
neutral window and align with the arrow marks), otherwise,
the spiral cable may be damaged.
ï‚· Always install the spiral cable correctly according to the specified operating instructions.
ï‚· DO NOT rotate the spiral cable over specified turns to prevent it from breaking.
ï‚· Be sure to install the fixing claws in place when installing spiral cable.
ï‚· Check that horn operates normally after installation.
ï‚· Check the SRS warning light after installation, and make sure that supplemental restraint system
operates normally.
To Next Page
Loading...
Need help?
General
