Chery Automobile Co., Ltd.
17 - QR525MHE TRANSMISSION
17–20
17
Gear Shift Control Mechanism
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the auxiliary fascia console (See page 45-9).
4. Remove the gear shift control mechanism.
a. Remove the flexible shaft clamps and cotter pins
connecting select and shift cable with gear shift
control mechanism.
b. Remove the fixing bolts from gear shift control
mechanism, and remove the gear shift control
mechanism.
ï€
(Tightening torque: 23 ± 2 N·m)
Installation
Installation is in the reverse order of removal.