Chery Automobile Co., Ltd.
49 - INTERIOR
49–25
49
f. Using a screwdriver wrapped with protective tape, pry
off the rear combination light service cover and
remove the rear combination light service cover.
g. Remove 5 fixing screws (arrow) from the C-pillar
lower protector assembly.
(Tightening torque: 1.5 ± 1 N·m)
h. Using an interior crow plate, pry off the clips from the
C-pillar lower protector assembly, and remove the left
C-pillar lower protector assembly.
Installation
Installation is in the reverse order of removal.
Make sure the damaged clips are replaced and the C-pillar lower protector assembly is installed in place
when installing the C-pillar lower protector assembly.
The C-pillar lower protector assembly, C-pillar upper protector and rear door opening weatherstrip should
be fitted closely after installing the C-pillar lower protector assembly.
To Next Page
