Chery Automobile Co., Ltd.
46 - SEAT
46–24
46
2. Power seat assembly
a. Move the seat to the foremost and rearmost positions
by moving the seat position adjust switch back and
forth, and check if the seat is difficult to move, stuck,
has high sliding resistance, makes noise, etc. If the
above conditions occur, repair or replace in time.
b. Adjust the seatback reclining to the maximum and
minimum angle by pulling the seatback reclining
adjust switch, and check if the seatback is difficult to
move, stuck, etc. If the above conditions occur, repair
or replace in time.
c. Adjust the seat height to the highest and lowest
position by pulling the seat cushion height adjust
switch, and check if the seat is difficult to move, stuck,
etc. If the above conditions occur, repair or replace in
time.
To Next Page
Loading...
Need help?
General
