Cisco 8811

Description and more informationFeature
Allows a user to join a nonprivate call on a shared phone line. cBarge adds a user to a
call and converts it into a conference, allowing the user and other parties to access
conference features. The conference call is created using the Cisco Unified
Communications Manager conference bridge functionality.
In Firmware Release 10.2(2) and later, the cBarge functionality is accessed using the
Barge softkey.
For more information, refer to the "Barge" chapter, Feature Configuration Guide for
Cisco Unified Communications Manager.
cBarge
Allows a user to charge a mobile device by connecting it to the USB port of the Cisco
IP Phone.
See Cisco IP Phone 8800 Series User Guide.
Charge a Mobile Device
Allows users access to their Cisco IP Phone configuration such as line appearances,
services, and speed dials from a shared Cisco IP Phone.
Cisco Extension Mobility is useful if people work from a variety of locations within
your company or if they share a workspace with coworkers.
Cisco Extension Mobility
Enables a user configured in one cluster to log into a Cisco IP Phone in another cluster.
Users from a home cluster log into a Cisco IP Phone at a visiting cluster.
Configure Cisco Extension Mobility on Cisco IP Phones before you configure
EMCC.
Note
Cisco Extension Mobility Cross Cluster
(EMCC)
Provides call routing and other call management features to help managers and assistants
handle phone calls more effectively.
See Set up Cisco IP Manager Assistant, on page 177.
Cisco IP Manager Assistant (IPMA)
Provides additional keys by adding an expansion module to the phone.
For additional information, see Cisco IP Phone 7800 and 8800 Series Accessories Guide
for Cisco Unified Communications Manager.
Cisco IP Phone 8800 Key Expansion
Module
Cisco IP Phone 8851/8861 Key Expansion
Module
Cisco IP Phone 8865 Key Expansion
Module
Provides support for the Cisco IP Phone 8811.Cisco IP Phone 8811 Support
Provides support for the Cisco IP Phone 8851NRCisco IP Phone 8851NR Support
The Cisco Unified Communication Manager Express uses a special tag in the information
sent to the phone to identify itself. This tag enables the phone to provide services to the
user that the switch supports.
See:
•
Cisco Unified Communications Manager Express System Administrator Guide
•
Cisco Unified Communications Manager Express Interaction, on page 18
Cisco Unified Communications Manager
Express (Unified CME) Version
Negotiation
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
123
Telephone Features