Cisco 8811

NotesSupported as a
Softkey
Configurable Softkeys in
the Softkey Template
configuration
Feature
—
YesResume (Resume)Resume
—
NoSelect (Select)Select
Phone displays SpeedDial.YesAbbreviated Dial
(AbbrDial)
Speed Dial
Transfer is a dedicated button.YesTransfer (Trfr)Transfer
—
NoVideo Mode Command
(VidMode)
Video Mode
Command
Procedure
Step 1
In Cisco Unified Communications Manager Administration, select one of the following windows:
•
To configure softkey templates, select Device > Device Settings > Softkey Template.
•
To assign a softkey template to a phone, select Device > Phone and configure the Softkey Template
field.
Step 2
Save the changes.
Related Topics
Cisco Unified Communications Manager Documentation, on page xvii
Phone Button Templates
Phone button templates let you assign speed dials and call-handling features to programmable buttons.
Call-handling features that can be assigned to buttons include Answer, Mobility, and All Calls.
Ideally, you modify templates before you register phones on the network. In this way, you can access customized
phone button template options from Cisco Unified Communications Manager during registration.
Modify Phone Button Template
For more information about IP Phone services and configuring line buttons, see the documentation for your
particular Cisco Unified Communications Manager release.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
185
Phone Button Templates