Cisco IP Phone Address Book Synchronizer Deployment
The Cisco IP Phone Address Book Synchronizer synchronizes data that is stored in your Microsoft Windows
address book with the Cisco Unified Communications Manager directory and the Self Care Portal Personal
Address Book.
To successfully synchronize the Windows address book with the Personal Address Book, all Windows
address book users should be entered in the Windows address book before you perform the following
procedures.
Tip
Install Synchronizer
To install the Cisco IP Phone Address Book Synchronizer, follow these steps:
Procedure
Step 1
Get the Cisco IP Phone Address Book Synchronizer installer file from your system administrator.
Step 2
Double-click the TabSyncInstall.exe file that your administrator provided.
Step 3
Select Run.
Step 4
Select Next.
Step 5
Read the license agreement information, and select the I Accept. Select Next.
Step 6
Choose the directory in which you want to install the application and select Next.
Step 7
Select Install.
Step 8
Select Finish.
Step 9
To complete the process, follow the steps in Set Up Synchronizer, on page 197.
Set Up Synchronizer
To configure the Cisco IP Phone Address Book Synchronizer, perform these steps:
Procedure
Step 1
Open the Cisco IP Phone Address Book Synchronizer.
If you accepted the default installation directory, you can open the application by choosing Start > All
Programs > Cisco Systems > TabSync.
Step 2
To configure user information, select User.
Step 3
Enter the Cisco IP Phone user name and password and select OK.
Step 4
To configure Cisco Unified Communications Manager server information, select Server.
Step 5
Enter the IP address or host name and the port number of the Cisco Unified Communications Manager server
and select OK.
Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager
197
User Personal Directory Entries Setup
To Next Page
Loading...
Need help?
General
